Datasheet

 2011-2012 Microchip Technology Inc. DS75018C-page 281
dsPIC33FJ06GS001/101A/102A/202A and dsPIC33FJ09GS302
TABLE 25-13: INTERNAL VOLTAGE REGULATOR SPECIFICATIONS
TABLE 25-12: DC CHARACTERISTICS: PROGRAM MEMORY
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  TA  +125°C for Extended
Param. Symbol Characteristic Min. Typ.
(1)
Max. Units Conditions
Program Flash Memory
D130 E
P Cell Endurance 10,000 — — E/W -40C to +125C
D131 V
PR VDD for Read VMIN —3.6VVMIN = Minimum operating
voltage
D132B VPEW VDD for Self-Timed Write VMIN —3.6VVMIN = Minimum operating
voltage
D134 T
RETD Characteristic Retention 20 — — Year Provided no other specifications
are violated, -40C to +125C
D135 IDDP Supply Current during
Programming
—10 —mA
D137a TPE Page Erase Time 20.1 — 26.5 ms TPE = 168517 FRC cycles,
TA = +85°C
(2)
D137b TPE Page Erase Time 19.5 — 27.3 ms TPE = 168517 FRC cycles,
T
A = +125°C
(2)
D138a TWW Word Write Cycle Time 42.3 — 55.9 µs TWW = 355 FRC cycles,
TA = +85°C
(2)
D138b TWW Word Write Cycle Time 41.1 — 57.6 µs TWW = 355 FRC cycles,
TA = +125°C
(2)
Note 1: Data in “Typ” column is at 3.3V, +25°C unless otherwise stated.
2: Other conditions: FRC = 7.37 MHz, TUN<5:0> = ‘b011111 (for Minimum), TUN<5:0> = ‘b100000 (for
Maximum). This parameter depends on the FRC accuracy (see Table 25-20) and the value of the FRC
Oscillator Tuning register (see Register 9-4). For complete details on calculating the Minimum and
Maximum time, see Section 5.3 “Programming Operations”.
Operating Conditions: -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param. Symbol Characteristics Min. Typ. Max. Units Comments
C
EFC External Filter Capacitor
Value
(1)
4.7 10 — F Capacitor must be low
series resistance
(< 0.5 Ohms)
Note 1: Typical V
CAP voltage = 2.5 volts when VDD  VDDMIN.