Datasheet
dsPIC33FJ06GS001/101A/102A/202A and dsPIC33FJ09GS302
DS75018C-page 280 2011-2012 Microchip Technology Inc.
TABLE 25-10: DC CHARACTERISTICS: I/O PIN OUTPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C TA +85°C for Industrial
-40°C T
A +125°C for Extended
Param. Symbol Characteristic Min. Typ. Max. Units Conditions
DO10 V
OL Output Low Voltage
I/O Pins:
4x Sink Driver Pins – RA0-RA2,
RB0-RB2, RB5-RB10, RB15
——0.4VIOL 6 mA, VDD = 3.3V
(1)
Output Low Voltage
I/O Pins:
16x Sink Driver Pins – RA3, RA4,
RB3, RB4, RB11-RB14
——0.4VIOL 18 mA, VDD = 3.3V
(1)
DO20 VOH Output High Voltage
I/O Pins:
4x Source Driver Pins – RA0-RA2,
RB0-RB2, RB5-RB10, RB15
2.4 — — V IOH -6 mA, VDD = 3.3V
(1)
Output High Voltage
I/O Pins:
16x Source Driver Pins – RA3,
RA4, RB3, RB4, RB11-RB14
2.4 — — V IOH -18 mA, VDD = 3.3V
(1)
DO20A VOH1 Output High Voltage
I/O Pins:
4x Source Driver Pins – RA0-RA2,
RB0-RB2, RB5-RB10, RB15
1.5 — — V IOH -12 mA, VDD = 3.3V
(1)
2.0 — — IOH -11 mA, VDD = 3.3V
(1)
3.0 — — IOH -3 mA, VDD = 3.3V
(1)
Output High Voltage
I/O Pins:
16x Source Driver Pins – RA3,
RA4, RB3, RB4, RB11-RB14
1.5 — — V IOH -30 mA, VDD = 3.3V
(1)
2.0 — — IOH -25 mA, VDD = 3.3V
(1)
3.0 — — IOH -8 mA, VDD = 3.3V
(1)
Note 1: These parameters are characterized, but not tested.
TABLE 25-11: ELECTRICAL CHARACTERISTICS: BOR
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(3)
(unless otherwise stated)
Operating temperature -40°C T
A +85°C for Industrial
-40°C TA +125°C for Extended
Param. Symbol Characteristic Min.
(1)
Typ. Max. Units Conditions
BO10 V
BOR BOR Event on VDD Transition
High-to-Low
BOR Event is Tied to V
DD Core
Voltage Decrease
2.55 — 2.96 V (See Note 2)
Note 1: These parameters are for design guidance only and are not tested in manufacturing.
2: The device will operate as normal until the V
DDMIN threshold is reached.
3: Overall functional device operation at V
BORMIN < VDD < VDDMIN is tested but not characterized. All device
analog modules, such as the ADC, etc., will function but with degraded performance below V
DDMIN.