Datasheet

 2011-2012 Microchip Technology Inc. DS75018C-page 277
dsPIC33FJ06GS001/101A/102A/202A and dsPIC33FJ09GS302
TABLE 25-8: DC CHARACTERISTICS: DOZE CURRENT (IDOZE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  TA  +125°C for Extended
Param. Typical
(1)
Max. Doze Ratio Units Conditions
Doze Current (I
DOZE)
(2)
DC73a 30 45 1:2 mA
-40°C 3.3V 40 MIPSDC73f 16 23 1:64 mA
DC73g 16 23 1:128 mA
DC70a 30 45 1:2 mA
+25°C 3.3V 40 MIPSDC70f 16 23 1:64 mA
DC70g 16 23 1:128 mA
DC71a 30 45 1:2 mA
+85°C 3.3V 40 MIPSDC71f 16 23 1:64 mA
DC71g 16 23 1:128 mA
DC72a 30 45 1:2 mA
+125°C 3.3V 40 MIPSDC72f 16 23 1:64 mA
DC72g 16 23 1:128 mA
Note 1: Data in the Typical column is at 3.3V, +25°C unless otherwise stated.
2: I
DOZE is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on
the current consumption. The test conditions for all I
DOZE measurements are as follows:
• Oscillator is configured in EC mode, OSC1 is driven with external square wave from rail-to-rail
• CLKO is configured as an I/O input pin in the Configuration Word
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD; WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (PMDx bits are
all zeroed)
• CPU is executing while(1) statement