Datasheet

 2011-2012 Microchip Technology Inc. DS75018C-page 275
dsPIC33FJ06GS001/101A/102A/202A and dsPIC33FJ09GS302
TABLE 25-6: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param. Typical
(1)
Max. Units Conditions
Idle Current (I
IDLE): Core Off Clock On Base Current
(2)
DC40d 13 21 mA -40°C
3.3V 10 MIPS
DC40a 13 21 mA +25°C
DC40b 13 21 mA +85°C
DC40c 13 21 mA +125°C
DC41d 16 24 mA -40°C
3.3V 16 MIPS
(3)
DC41a 16 mA +25°C24
DC41b 16 24 mA +85°C
DC41c 16 24 mA +125°C
DC42d 17 27 mA -40°C
3.3V 20 MIPS
(3)
DC42a 17 27 mA +25°C
DC42b 17 27 mA +85°C
DC42c 17 27 mA +125°C
DC43d 20 32 mA -40°C
3.3V 30 MIPS
(3)
DC43a 20 32 mA +25°C
DC43b 20 32 mA +85°C
DC43c 20 32 mA +125°C
DC44d 23 37 mA -40°C
3.3V 40 MIPS
DC44a 23 37 mA +25°C
DC44b 23 37 mA +85°C
DC44c 23 37 mA +125°C
Note 1: Data in “Typical” column is at 3.3V, +25°C unless otherwise stated.
2: Base Idle current is measured as follows:
• CPU core is off, oscillator is configured in EC mode, OSC1 is driven with external square wave from
rail-to-rail
• CLKO is configured as an I/O input pin in the Configuration Word
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD; WDT and FSCM are disabled
• No peripheral modules are operating; however, every peripheral is being clocked (PMDx bits are
all zeroed)
3: These parameters are characterized but not tested in manufacturing.