Datasheet

dsPIC33FJ06GS001/101A/102A/202A and dsPIC33FJ09GS302
DS75018C-page 274  2011-2012 Microchip Technology Inc.
TABLE 25-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param. Typical
(1)
Max. Units Conditions
Operating Current (I
DD)
(2)
DC20d 15 23 mA -40°C
3.3V 10 MIPS
DC20a 15 23 mA +25°C
DC20b 15 23 mA +85°C
DC20c 15 23 mA +125°C
DC21d 23 34 mA -40°C
3.3V 16 MIPS
(3)
DC21a 23 34 mA +25°C
DC21b 23 34 mA +85°C
DC21c 23 34 mA +125°C
DC22d 25 38 mA -40°C
3.3V 20 MIPS
(3)
DC22a 25 38 mA +25°C
DC22b 25 38 mA +85°C
DC22c 25 38 mA +125°C
DC23d 34 51 mA -40°C
3.3V 30 MIPS
(3)
DC23a 34 51 mA +25°C
DC23b 34 51 mA +85°C
DC23c 34 51 mA +125°C
DC24d 43 64 mA -40°C
3.3V 40 MIPS
(3)
DC24a 43 64 mA +25°C
DC24b 43 64 mA +85°C
DC24c 43 64 mA +125°C
DC25d 83 125 mA -40°C
3.3V
40 MIPS
See Note 2, except PWM and ADC
are operating at maximum speed
(PTCON2 = 0x0000)
DC25a 83 125 mA +25°C
DC25b 83 125 mA +85°C
DC25c 83 125 mA +125°C
Note 1: Data in “Typical” column is at 3.3V, +25°C unless otherwise stated.
2: I
DD is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all I
DD measurements are as follows:
• Oscillator is configured in EC mode, OSC1 is driven with external square wave from rail-to-rail
• CLKO is configured as an I/O input pin in the Configuration Word
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD; WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (PMDx bits are
all zeroed)
• CPU is executing while(1) statement
3: These parameters are characterized but not tested in manufacturing.