Datasheet

 2011-2012 Microchip Technology Inc. DS75018C-page 241
dsPIC33FJ06GS001/101A/102A/202A and dsPIC33FJ09GS302
bit 4-0 TRGSRC6<4:0>: Trigger 6 Source Selection bits
Selects trigger source for conversion of analog channels AN13 and AN12.
11111 = Timer2 period match
•
•
•
11011 = Reserved
11010 = PWM Generator 4 current-limit ADC trigger
11001 = Reserved
11000 = PWM Generator 2 current-limit ADC trigger
10111 = PWM Generator 1 current-limit ADC trigger
10110 = Reserved
•
•
•
10010 = Reserved
10001 = PWM Generator 4 secondary trigger is selected
10000 = Reserved
01111 = PWM Generator 2 secondary trigger is selected
01110 = PWM Generator 1 secondary trigger is selected
01101 = Reserved
01100 = Timer1 period match
•
•
•
01000 = Reserved
00111 = PWM Generator 4 primary trigger is selected
00110 = Reserved
00101 = PWM Generator 2 primary trigger is selected
00100 = PWM Generator 1 primary trigger is selected
00011 = PWM Special Event Trigger is selected
00010 = Global software trigger is selected
00001 = Individual software trigger is selected
00000 = No conversion is enabled
REGISTER 19-7: ADCPC3: ADC CONVERT PAIR CONTROL REGISTER 3
(1)
(CONTINUED)
Note 1: If other conversions are in progress, conversion will be performed when the conversion resources are
available.
2: AN13 is internally connected to Vref in all devices. AN12 is internally connected to the EXTREF pin in the
dsPIC33FJ06001/202A and dsPIC33FJ09GS302 devices. The dsPIC33FJ06GS101A/102A devices not
have an EXTREF pin; therefore, any data read on the corresponding AN12 input will be invalid.