Datasheet

dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04

TABLE 26-4: DC CHARACTERISTICS: DOZE CURRENT (IDOZE)

DC CHARACTERISTICS

Standard Operating Conditions: 3.0V to 3.6V

(unless otherwise stated)

Operating temperature -40°C ≤ T

A ≤ +85°C for Industrial

Parameter No. Typical Max

Doze

Ratio

Units Conditions

MDC74a 80 105 1:2 mA

-40°C 3.3V 50 MIPSMDC74f 65 105 1:64 mA

MDC74g 65 105 1:128 mA

MDC75a 81 105 1:2 mA

+25°C 3.3V 50 MIPSMDC75f 65 105 1:64 mA

MDC75g 65 105 1:128 mA

MDC76a 81 105 1:2 mA

+85°C 3.3V 50 MIPSMDC76f 65 105 1:64 mA

MDC76g 65 105 1:128 mA

Note 1: primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading and

switching rate, oscillator type, internal code execution pattern and temperature, also have an impact on the

current consumption. The test conditions for all IDOZE measurements are as follows:

• Oscillator is configured in EC mode and external clock active, OSC1 is driven with external square

wave from rail-to-rail (EC clock overshoot/undershoot < 250 mV required)

• CLKO is configured as an I/O input pin in the Configuration word

• All I/O pins are configured as inputs and pulled to V

•MCLR = VDD, WDT and FSCM are disabled

• CPU, SRAM, program memory and data memory are operational

• No peripheral modules are operating; however, every peripheral is being clocked (all PMDx bits are

zeroed)

• CPU executing while(1) statement

• JTAG disabled