Datasheet

dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04

TABLE 26-3: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)

DC CHARACTERISTICS

Standard Operating Conditions: 3.0V to 3.6V

(unless otherwise stated)

Operating temperature -40°C ≤ T

A ≤ +85°C for Industrial

Parameter

No.

Typical Max Units Conditions

Idle Current (I

IDLE): Core Off Clock On Base Current

(1)

MDC45d 64 105 mA -40°C

3.3V 50 MIPSMDC45a 64 105 mA +25°C

MDC45b 64 105 mA +85°C

Note 1: Base Idle current (I

IDLE) is measured as follows:

• CPU core is off, oscillator is configured in EC mode and external clock active, OSC1 is driven with

external square wave from rail-to-rail (EC clock overshoot/undershoot < 250 mV required)

• CLKO is configured as an I/O input pin in the Configuration word

• All I/O pins are configured as inputs and pulled to V

•MCLR = VDD, WDT and FSCM are disabled

• No peripheral modules are operating; however, every peripheral is being clocked (all PMDx bits are

zeroed)

• The NVMSIDL bit (NVMCON<12>) = 1 (i.e., Flash regulator is set to stand-by while the device is in

Idle mode)

• JTAG disabled