Datasheet

ManualsBrandsMICROCHIP TECHNOLOGY ManualsMicrocontrollers, Microprocessors & QuartzesEmbedded microcontroller SOIC 28 16-Bit 40 null I/O number 21

331

332

333

334

335

336

337

338

339

340

dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04

26.0 50 MIPS ELECTRICAL CHARACTERISTICS

This section provides an overview of dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 electrical characteristics

for devices operating at 50 MIPS.

The specifications for 50 MIPS are identical to those shown in Section 24.0 “Electrical Characteristics”, with the

exception of the parameters listed in this section.

Parameters in this section begin with the letter “M”, which denotes 50 MIPS operation. For example, parameter DC29a

in Section 24.0 “Electrical Characteristics”, is the up to 40 MIPS operation equivalent of MDC29a.

Absolute maximum ratings for the dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 50 MIPS devices are listed

below. Exposure to these maximum rating conditions for extended periods can affect device reliability. Functional

operation of the device at these or any other conditions above the parameters indicated in the operation listings of this

specification is not implied.

Absolute Maximum Ratings

(1)

Ambient temperature under bias...............................................................................................................-40°C to +85°C

Storage temperature .............................................................................................................................. -65°C to +150°C

Voltage on V

DD with respect to VSS ......................................................................................................... -0.3V to +4.0V

Voltage on any pin that is not 5V tolerant, with respect to V

(3)

................................................... -0.3V to (VDD + 0.3V)

Voltage on any 5V tolerant pin with respect to VSS, when Vdd ≥ 3.0V

(3)

................................................. -0.3V to +5.6V

Voltage on any 5V tolerant pin with respect to Vss, when V

DD < 3.0V

(3)

........................................ -0.3V to (VDD + 0.3V)

Maximum current out of V

SS pin ...........................................................................................................................300 mA

Maximum current into V

DD pin

(2)

...........................................................................................................................250 mA

Maximum current sourced/sunk by any 4x I/O pin..................................................................................................15 mA

Maximum current sourced/sunk by any 8x I/O pin..................................................................................................25 mA

Maximum current sourced/sunk by any 16x I/O pin................................................................................................45 mA

Maximum current sunk by all ports .......................................................................................................................200 mA

Maximum current sourced by all ports

(2)

............................................................................................................... 200 mA

Note 1: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the

device. This is a stress rating only, and functional operation of the device at those or any other conditions

above those indicated in the operation listings of this specification is not implied. Exposure to maximum

rating conditions for extended periods may affect device reliability.

2: Maximum allowable current is a function of device maximum power dissipation (see Table 24-2).

3: See the “Pin Diagrams” section for 5V tolerant pins.