Datasheet

dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
DS70318F-page 336 © 2008-2012 Microchip Technology Inc.
25.2 AC Characteristics and Timing
Parameters
The information contained in this section defines
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/
X04 AC characteristics and timing parameters for high
temperature devices. However, all AC timing
specifications in this section are the same as those in
Section 31.2 “AC Characteristics and Timing
Parameters”, with the exception of the parameters
listed in this section.
Parameters in this section begin with an H, which
denotes High temperature. For example, parameter
OS53 in Section 31.2 “AC Characteristics and
Timing Parameters” is the Industrial and Extended
temperature equivalent of HOS53.
TABLE 25-7: TEMPERATURE AND VOLTAGE SPECIFICATIONS – AC
FIGURE 25-1: LOAD CONDITIONS FOR DEVICE TIMING SPECIFICATIONS
TABLE 25-8: PLL CLOCK TIMING SPECIFICATIONS
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +150°C for High Temperature
Operating voltage VDD range as described in Table 25-1.
VDD/2
C
L
RL
Pin
Pin
V
SS
VSS
CL
RL =464Ω
C
L = 50 pF for all pins except OSC2
15 pF for OSC2 output
Load Condition 1
– for all pins except OSC2 Load Condition 2 – for OSC2
AC
CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +150°C for High Temperature
Param
No.
Symbol Characteristic Min Typ Max Units Conditions
HOS53 D
CLK CLKO Stability (Jitter)
(1)
-5 0.5 5 % Measured over 100 ms
period
Note 1: These parameters are characterized, but are not tested in manufacturing.