Datasheet

ManualsBrandsMICROCHIP TECHNOLOGY ManualsMicrocontrollers, Microprocessors & QuartzesEmbedded microcontroller SOIC 28 16-Bit 40 null I/O number 21

331

332

333

334

335

336

337

338

339

340

dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04

25.0 HIGH TEMPERATURE ELECTRICAL CHARACTERISTICS

This section provides an overview of dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 electrical characteristics

for devices operating in an ambient temperature range of -40°C to +150°C.

The specifications between -40°C to +150°C are identical to those shown in Section 24.0 “Electrical Characteristics”

for operation between -40°C to +125°C, with the exception of the parameters listed in this section.

Parameters in this section begin with an H, which denotes High temperature. For example, parameter DC10 in

Section 24.0 “Electrical Characteristics” is the Industrial and Extended temperature equivalent of HDC10.

Absolute maximum ratings for the dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04 high temperature devices

are listed below. Exposure to these maximum rating conditions for extended periods can affect device reliability.

Functional operation of the device at these or any other conditions above the parameters indicated in the operation

listings of this specification is not implied.

Absolute Maximum Ratings

(1)

Ambient temperature under bias

(3)

.........................................................................................................-40°C to +150°C

Storage temperature .............................................................................................................................. -65°C to +160°C

Voltage on V

DD with respect to VSS ......................................................................................................... -0.3V to +4.0V

Voltage on any pin that is not 5V tolerant with respect to VSS

(4)

.................................................... -0.3V to (VDD + 0.3V)

Voltage on any 5V tolerant pin with respect to V

SS when VDD < 3.0V

(4)

....................................... -0.3V to (VDD + 0.3V)

Voltage on any 5V tolerant pin with respect to V

SS when VDD ≥ 3.0V

(4)

.................................................... -0.3V to 5.6V

Maximum current out of VSS pin .............................................................................................................................60 mA

Maximum current into V

DD pin

(2)

.............................................................................................................................60 mA

Maximum junction temperature.............................................................................................................................+155°C

Maximum current sourced/sunk by any 4x I/O pin....................................................................................................4 mA

Maximum current sourced/sunk by any 8x I/O pin....................................................................................................8 mA

Maximum current sourced/sunk by any 16x I/O pin................................................................................................16 mA

Maximum current sunk by all ports combined ......................................................................................................180 mA

Maximum current sourced by all ports combined

(2)

..............................................................................................180 mA

Note: Programming of the Flash memory is not allowed above 125°C.

Note 1: Stresses above those listed under “Absolute Maximum Ratings” can cause permanent damage to the

device. This is a stress rating only, and functional operation of the device at those or any other conditions

above those indicated in the operation listings of this specification is not implied. Exposure to maximum

rating conditions for extended periods can affect device reliability.

2: Maximum allowable current is a function of device maximum power dissipation (see Table 25-2).

3: AEC-Q100 reliability testing for devices intended to operate at 150°C is 1,000 hours. Any design in which

the total operating time from 125°C to 150°C will be greater than 1,000 hours is not warranted without prior

written approval from Microchip Technology Inc.

4: Refer to the “Pin Diagrams” section for 5V tolerant pins.