Datasheet

© 2008-2012 Microchip Technology Inc. DS70318F-page 309
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
FIGURE 24-9: HIGH-SPEED PWM MODULE FAULT TIMING CHARACTERISTICS
FIGURE 24-10: HIGH-SPEED PWM MODULE TIMING CHARACTERISTICS
FLTx
PWMx
MP30
MP20
PWMx
MP11
MP10
Note: Refer to Figure 24-1 for load conditions.
TABLE 24-29: HIGH-SPEED PWM MODULE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Param
No.
Symbol Characteristic
(1)
Min Typ Max Units Conditions
MP10 TFPWM PWM Output Fall Time — 2.5 — ns
—
MP11 T
RPWM PWM Output Rise Time — 2.5
—
ns —
MP20
T
FD Fault Input ↓ to PWM
I/O Change
——15ns —
MP30
T
FH Minimum PWM Fault Pulse
Width
8 — — ns DTC<10> = 10
MP31 TPDLY Tap Delay 1.04 — — ns ACLK = 120 MHz
MP32
A
CLK PWM Input Clock
—
— 120 MHz See Note 2
Note 1: These parameters are characterized but not tested in manufacturing.
2: This parameter is a maximum allowed input clock for the PWM module.