Datasheet

dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
DS70318F-page 292 © 2008-2012 Microchip Technology Inc.
TABLE 24-8: DC CHARACTERISTICS: DOZE CURRENT (IDOZE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Parameter No. Typical
(1)
Max
Doze
Ratio
Units Conditions
DC73a 75 105 1:2 mA
-40°C 3.3V 40 MIPSDC73f 60 105 1:64 mA
DC73g 60 105 1:128 mA
DC70a 75 105 1:2 mA
+25°C 3.3V 40 MIPSDC70f 60 105 1:64 mA
DC70g 60 105 1:128 mA
DC71a 75 105 1:2 mA
+85°C 3.3V 40 MIPSDC71f 60 105 1:64 mA
DC71g 60 105 1:128 mA
DC72a 75 105 1:2 mA
+125°C 3.3V 40 MIPSDC72f 60 105 1:64 mA
DC72g 60 105 1:128 mA
Note 1: Data in the Typical column is at 3.3V, +25°C unless otherwise stated.
2: I
DOZE is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all I
DOZE measurements are as follows:
• Oscillator is configured in EC mode and external clock active, OSC1 is driven with external square
wave from rail-to-rail (EC clock overshoot/undershoot < 250 mV required)
• CLKO is configured as an I/O input pin in the Configuration word
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (all PMDx bits are
zeroed)
• CPU executing while(1) statement
• JTAG disabled