Datasheet

dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
DS70318F-page 290 © 2008-2012 Microchip Technology Inc.
TABLE 24-6: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C T
A +85°C for Industrial
-40°C TA +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Idle Current (IIDLE): Core Off Clock On Base Current
(2)
DC40d 45 100 mA -40°C
3.3V 10 MIPS
DC40a 45 100 mA +25°C
DC40b 45 100 mA +85°C
DC40c 45 100 mA +125°C
DC41d 47 100 mA -40°C
3.3V 16 MIPS
(3)
DC41a 47 mA +25°C100
DC41b 47 100 mA +85°C
DC41c 47 100 mA +125°C
DC42d 50 100 mA -40°C
3.3V 20 MIPS
(3)
DC42a 50 100 mA +25°C
DC42b 50 100 mA +85°C
DC42c 50 100 mA +125°C
DC43d 55 105 mA -40°C
3.3V 30 MIPS
(3)
DC43a 55 105 mA +25°C
DC43b 55 105 mA +85°C
DC43c 55 105 mA +125°C
DC44d 60 105 mA -40°C
3.3V 40 MIPS
DC44a 60 105 mA +25°C
DC44b 60 105 mA +85°C
DC44c 60 105 mA +125°C
Note 1: Data in “Typical” column is at 3.3V, +25°C unless otherwise stated.
2: Base Idle current (I
IDLE) is measured as follows:
CPU core is off, oscillator is configured in EC mode and external clock active, OSC1 is driven with
external square wave from rail-to-rail (EC clock overshoot/undershoot < 250 mV required)
CLKO is configured as an I/O input pin in the Configuration word
All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD, WDT and FSCM are disabled
No peripheral modules are operating; however, every peripheral is being clocked (all PMDx bits are
zeroed)
JTAG disabled
3: These parameters are characterized but not tested in manufacturing.