Datasheet

© 2008-2012 Microchip Technology Inc. DS70318F-page 147
dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04
REGISTER 9-1: PMD1: PERIPHERAL MODULE DISABLE CONTROL REGISTER 1
U-0 U-0 R/W-0 R/W-0 R/W-0 U-0 R/W-0 U-0
— — T3MD T2MD T1MD — PWMMD
(1)
—
bit 15 bit 8
R/W-0 U-0 R/W-0 U-0 R/W-0 U-0 U-0 R/W-0
I2C1MD
—U1MD—SPI1MD— — ADCMD
bit 7 bit 0
Legend:
R = Readable bit W = Writable bit U = Unimplemented bit, read as ‘0’
-n = Value at POR ‘1’ = Bit is set ‘0’ = Bit is cleared x = Bit is unknown
bit 15-14 Unimplemented: Read as ‘0’
bit 13 T3MD: Timer3 Module Disable bit
1 = Timer3 module is disabled
0 = Timer3 module is enabled
bit 12 T2MD: Timer2 Module Disable bit
1 = Timer2 module is disabled
0 = Timer2 module is enabled
bit 11 T1MD: Timer1 Module Disable bit
1 = Timer1 module is disabled
0 = Timer1 module is enabled
bit 10 Unimplemented: Read as ‘0’
bit 9 PWMMD: PWM Module Disable bit
(1)
1 = PWM module is disabled
0 = PWM module is enabled
bit 8 Unimplemented: Read as ‘0’
bit 7 I2C1MD: I2C1 Module Disable bit
1 = I2C1 module is disabled
0 = I2C1 module is enabled
bit 6 Unimplemented: Read as ‘0’
bit 5 U1MD: UART1 Module Disable bit
1 = UART1 module is disabled
0 = UART1 module is enabled
bit 4 Unimplemented: Read as ‘0’
bit 3 SPI1MD: SPI1 Module Disable bit
1 = SPI1 module is disabled
0 = SPI1 module is enabled
bit 2-1 Unimplemented: Read as ‘0’
bit 0 ADCMD: ADC Module Disable bit
1 = ADC module is disabled
0 = ADC module is enabled
Note 1: Once the PWM module is re-enabled (PWMMD is set to ‘1’ and then set to ‘0’), all PWM registers must be
reinitialized.