Datasheet

dsPIC33FJ06GS101/X02 and dsPIC33FJ16GSX02/X04

Referenced Sources

This device data sheet is based on the following

individual chapters of the “dsPIC33F/PIC24H Family

Reference Manual”. These documents should be

considered as the primary reference for the operation

of a particular module or device feature.

• Section 1. “Introduction” (DS70197)

• Section 2. “CPU” (DS70204)

• Section 3. “Data Memory” (DS70202)

• Section 4. “Program Memory” (DS70203)

• Section 5. “Flash Programming” (DS70191)

• Section 8. “Reset” (DS70192)

• Section 9. “Watchdog Timer and Power-Saving Modes” (DS70196)

• Section 10. “I/O Ports” (DS70193)

• Section 11. “Timers” (DS70205)

• Section 12. “Input Capture” (DS70198)

• Section 13. “Output Compare” (DS70209)

• Section 16. “Analog-to-Digital Converter (ADC)”

• Section 17. “UART” (DS70188)

• Section 18. “Serial Peripheral Interface (SPI)” (DS70206)

• Section 19. “Inter-Integrated Circuit™ (I2C™)” (DS70195)

• Section 23. “CodeGuard™ Security (DS70199)

• Section 24. “Programming and Diagnostics” (DS70207)

• Section 25. “Device Configuration” (DS70194)

• Section 41. “Interrupts (Part IV)” (DS70300)

• Section 42. “Oscillator (Part IV)” (DS70307)

• Section 43. “High- Speed PWM” (DS70323)

• Section 44. “High-Speed 10-bit Analog-to-Digital Converter (ADC)” (DS70321)

• Section 45. “High-Speed Analog Comparator” (DS70296)

• Section 52. “Oscillator (Part VI)” (DS70644)

Note: To access the documents listed below,

browse to the documentation section of

the dsPIC33FJ16GS504 product page of

the Microchip web site

(www.microchip.com).

In addition to parameters, features, and