Datasheet

dsPIC33EPXXX(GP/MC/MU)806/810/814 and PIC24EPXXX(GP/GU)810/814
DS70616G-page 554  2009-2012 Microchip Technology Inc.
FIGURE 32-35: ECAN™ MODULE I/O TIMING CHARACTERISTICS
TABLE 32-51: ECAN™ MODULE I/O TIMING REQUIREMENTS
FIGURE 32-36: UARTx MODULE I/O TIMING CHARACTERISTICS
TABLE 32-52: UARTx MODULE I/O TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param. Symbol Characteristic
(1)
Min. Typ.
(2)
Max. Units Conditions
CA10 TioF Port Output Fall Time — — — ns See Parameter DO32
CA11 TioR Port Output Rise Time — — — ns See Parameter DO31
CA20 TCWF Pulse Width to Trigger
CAN Wake-up Filter
120 — — ns
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typ” column is at 3.3V, +25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
AC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +125°C
Param. Symbol Characteristic
(1)
Min. Typ.
(2)
Max. Units Conditions
UA10 T
UABAUD UARTx Baud Time 66.67 — — ns
UA11 F
BAUD UARTx Baud Frequency — — 15 mbps
UA20 T
CWF Start Bit Pulse Width to Trigger
UARTx Wake-up
500 — — ns
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typ” column is at 3.3V, +25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
CxTx Pin
(output)
CA10 CA11
Old Value
New Value
CA20
CxRx Pin
(input)
UA20
UxRX
MSb In
LSb In
Bit 6-1
UA10
UXTX