Datasheet

dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X AND PIC24EPXXXGP/MC20X
DS70000657H-page 24 2011-2013 Microchip Technology Inc.
Referenced Sources
This device data sheet is based on the following
individual chapters of the “dsPIC33/PIC24 Family Ref-
erence Manual”. These documents should be
considered as the general reference for the operation
of a particular module or device feature.
“Introduction” (DS70573)
“CPU(DS70359)
“Data Memory” (DS70595)
“Program Memory” (DS70613)
“Flash Programming” (DS70609)
“Interrupts” (DS70600)
“Oscillator” (DS70580)
“Reset” (DS70602)
“Watchdog Timer and Power-Saving Modes” (DS70615)
“I/O Ports” (DS70598)
“Timers” (DS70362)
“Input Capture” (DS70352)
“Output Compare” (DS70358)
“High-Speed PWM” (DS70645)
“Quadrature Encoder Interface (QEI)” (DS70601)
“Analog-to-Digital Converter (ADC)” (DS70621)
“UART” (DS70582)
“Serial Peripheral Interface (SPI)” (DS70569)
“Inter-Integrated Circuit (I
2
C™) (DS70330)
“Enhanced Controller Area Network (ECAN™)” (DS70353)
“Direct Memory Access (DMA)” (DS70348)
“CodeGuard™ Security” (DS70634)
“Programming and Diagnostics (DS70608)
“Op Amp/Comparator” (DS70357)
“Programmable Cyclic Redundancy Check (CRC)” (DS70346)
“Device Configuration (DS70618)
“Peripheral Trigger Generator (PTG)” (DS70669)
“Charge Time Measurement Unit (CTMU)” (DS70661)
Note 1: To access the documents listed below,
browse to the documentation section of the
dsPIC33EP64MC506 product page of the
Microchip web site (www.microchip.com)
or select a family reference manual section
from the following list.
In addition to parameters, features and
other documentation, the resulting page
provides links to the related family
reference manual sections.