Datasheet

dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X AND PIC24EPXXXGP/MC20X
DS70657G-page 402  2011-2013 Microchip Technology Inc.
TABLE 30-6: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter
No.
Typ. Max. Units Conditions
Operating Current (I
DD)
(1)
DC20d 9 15 mA -40°C
3.3V 10 MIPS
DC20a 9 15 mA +25°C
DC20b 9 15 mA +85°C
DC20c 9 15 mA +125°C
DC22d 16 25 mA -40°C
3.3V 20 MIPS
DC22a 16 25 mA +25°C
DC22b 16 25 mA +85°C
DC22c 16 25 mA +125°C
DC24d 27 35 mA -40°C
3.3V 40 MIPS
DC24a 27 35 mA +25°C
DC24b 27 35 mA +85°C
DC24c 27 35 mA +125°C
DC25d 36 55 mA -40°C
3.3V 60 MIPS
DC25a 36 55 mA +25°C
DC25b 36 55 mA +85°C
DC25c 36 55 mA +125°C
DC26d 41 60 mA -40°C
3.3V 70 MIPSDC26a 41 60 mA +25°C
DC26b 41 60 mA +85°C
Note 1: I
DD is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading
and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact
on the current consumption. The test conditions for all I
DD measurements are as follows:
• Oscillator is configured in EC mode with PLL, OSC1 is driven with external square wave from
rail-to-rail (EC clock overshoot/undershoot < 250 mV required)
• CLKO is configured as an I/O input pin in the Configuration Word
• All I/O pins are configured as inputs and pulled to V
SS
•MCLR = VDD, WDT and FSCM are disabled
• CPU, SRAM, program memory and data memory are operational
• No peripheral modules are operating; however, every peripheral is being clocked (all PMDx bits are
zeroed)
• CPU is executing while(1) statement
• JTAG is disabled