Datasheet

 2011-2013 Microchip Technology Inc. DS70657G-page 467
dsPIC33EPXXXGP50X, dsPIC33EPXXXMC20X/50X AND PIC24EPXXXGP/MC20X
TABLE 31-4: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
TABLE 31-5: DC CHARACTERISTICS: OPERATING CURRENT (I
DD)
TABLE 31-6: DC CHARACTERISTICS: DOZE CURRENT (I
DOZE)
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +150°C
Parameter
No.
Typical Max Units Conditions
Power-Down Current (I
PD)
HDC60e 750 2500 A +150°C 3.3V Base Power-Down Current
(Notes 1, 3)
HDC61c 15 — A +150°C 3.3V Watchdog Timer Current: I
WDT
(Notes 2, 4)
Note 1: Base IPD is measured with all peripherals and clocks shut down. All I/Os are configured as inputs and
pulled to V
SS. WDT, etc., are all switched off and VREGS (RCON<8>) = 1.
2: The  current is the additional current consumed when the module is enabled. This current should be
added to the base I
PD current.
3: These currents are measured on the device containing the most memory in this family.
4: These parameters are characterized, but are not tested in manufacturing.
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  T
A  +150°C
Parameter
No.
Typical Max Units Conditions
HDC20 9 15 mA +150°C 3.3V 10 MIPS
HDC22 16 25 mA +150°C 3.3V 20 MIPS
HDC23 30 50 mA +150°C 3.3V 40 MIPS
DC CHARACTERISTICS
Standard Operating Conditions: 3.0V to 3.6V
(unless otherwise stated)
Operating temperature -40°C  TA  +150°C
Parameter
No.
Typical Max
Doze
Ratio
Units Conditions
HDC72a 24 35 1:2 mA
+150°C 3.3V 40 MIPSHDC72f
(1)
14 — 1:64 mA
HDC72g
(1)
12 — 1:128 mA
Note 1: Parameters with Doze ratios of 1:64 and 1:128 are characterized, but are not tested in manufacturing.