Datasheet

© 2006 Microchip Technology Inc. DS70117F-page 175
dsPIC30F6011/6012/6013/6014
TABLE 23-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Operating Current (I
DD)
(2)
DC31a 6.8 10 mA 25°C
3.3V
0.128 MIPS
LPRC (512 kHz)
DC31b 6.3 10 mA 85°C
DC31c 6.1 10 mA 125°C
DC31e 16 22 mA 25°C
5VDC31f 15 22 mA 85°C
DC31g 15 22 mA 125°C
DC30a 13 19 mA 25°C
3.3V
(1.8 MIPS)
FRC (7.37 MHz)
DC30b 13 19 mA 85°C
DC30c 13 19 mA 125°C
DC30e 27 39 mA 25°C
5VDC30f 26 39 mA 85°C
DC30g 25 39 mA 125°C
DC23a 27 41 mA 25°C
3.3V
4 MIPS
DC23b 27 41 mA 85°C
DC23c 27 41 mA 125°C
DC23e 41 60 mA 25°C
5VDC23f 40 60 mA 85°C
DC23g 40 60 mA 125°C
DC24a 46 71 mA 25°C
3.3V
10 MIPS
DC24b 46 71 mA 85°C
DC24c 47 71 mA 125°C
DC24e 79 120 mA 25°C
5VDC24f 78 120 mA 85°C
DC24g 78 120 mA 125°C
DC27a 83 120 mA 25°C
3.3V
20 MIPS
DC27b 83 120 mA 85°C
DC27d 138 190 mA 25°C
5VDC27e 137 190 mA 85°C
DC27f 136 190 mA 125°C
DC29a 194 255 mA 25°C
5V 30 MIPS
DC29b 192 255 mA 85°C
Note 1: Data in “Typical” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature also have
an impact on the current consumption. The test conditions for all I
DD measurements are as follows: OSC1
driven with external square wave from rail to rail. All I/O pins are configured as Inputs and pulled to V
DD.
MCLR
= VDD, WDT, FSCM, LVD and BOR are disabled. CPU, SRAM, Program Memory and Data
Memory are operational. No peripheral modules are operating.