Datasheet

dsPIC30F6011A/6012A/6013A/6014A
DS70143E-page 178 © 2011 Microchip Technology Inc.
TABLE 23-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Parameter
No.
Typical Max Units Conditions
Power Down Current (I
PD)
DC60a 0.5 — μA 25°C
3.3V
Base Power Down Current
(1)
DC60b 1 40 μA 85°C
DC60c 24 65 μA125°C
DC60e 0.7 — μA 25°C
5VDC60f 4 55 μA 85°C
DC60g 35 90 μA125°C
DC61a 9 20 μA 25°C
3.3V
Watchdog Timer Current: ΔI
WDT
(2)
DC61b 9 20 μA 85°C
DC61c 8 20 μA125°C
DC61e 18 40 μA 25°C
5VDC61f 16 40 μA 85°C
DC61g 15 40 μA125°C
DC62a 4 10 μA 25°C
3.3V
Timer 1 w/32 kHz Crystal: ΔI
TI32
(2)
DC62b 5 10 μA 85°C
DC62c 4 10 μA125°C
DC62e 4 15 μA 25°C
5VDC62f 6 15 μA 85°C
DC62g 5 15 μA125°C
DC63a 30 55 μA 25°C
3.3V
BOR On: ΔI
BOR
(2)
DC63b 34 55 μA 85°C
DC63c 35 55 μA125°C
DC63e 36 60 μA 25°C
5VDC63f 39 60 μA 85°C
DC63g 40 60 μA125°C
DC66a 20 35 μA 25°C
3.3V
Low Voltage Detect: ΔI
LVD
(2)
DC66b 22 35 μA 85°C
DC66c 23 35 μA125°C
DC66e 24 40 μA 25°C
5VDC66f 26 40 μA 85°C
DC66g 26 40 μA125°C
Note 1: Base I
PD is measured with all peripherals and clocks shut down. All I/Os are configured as inputs and
pulled high. LVD, BOR, WDT, etc. are all switched off.
2: The Δ current is the additional current consumed when the module is enabled. This current should be
added to the base I
PD current.