Datasheet

© 2011 Microchip Technology Inc. DS70150E-page 197
dsPIC30F6010A/6015
FIGURE 24-9: INPUT CAPTURE (CAPx) TIMING CHARACTERISTICS
FIGURE 24-10: OUTPUT COMPARE MODULE (OCx) TIMING CHARACTERISTICS
ICX
IC10 IC11
IC15
Note: Refer to Figure 24-2 for load conditions.
TABLE 24-27: INPUT CAPTURE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Param
No.
Symbol Characteristic
(1)
Min Max Units Conditions
IC10 TccL ICx Input Low Time No Prescaler 0.5 TCY + 20 — ns —
With Prescaler 10 — ns
IC11 TccH ICx Input High Time No Prescaler 0.5 T
CY + 20 — ns —
With Prescaler 10 — ns
IC15 TccP ICx Input Period (2 T
CY + 40)/N — ns N = prescale
value (1, 4, 16)
Note 1: These parameters are characterized but not tested in manufacturing.
OCx
OC11
OC10
(Output Compare
Note: Refer to Figure 24-2 for load conditions.
or PWM Mode)
TABLE 24-28: OUTPUT COMPARE MODULE TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Param
No.
Symbol Characteristic
(1)
Min Typ
(2)
Max Units Conditions
OC10 TccF OCx Output Fall Time — — — ns See parameter DO32
OC11 TccR OCx Output Rise Time — — — ns See parameter DO31
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typ” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.