Datasheet

© 2011 Microchip Technology Inc. DS70150E-page 181
dsPIC30F6010A/6015
TABLE 24-7: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Parameter
No.
Typical
(1,2)
Max Units Conditions
Operating Current (I
DD)
(3)
DC51a 9.0 14 mA 25°C
3.3V
0.128 MIPS
LPRC (512 kHz)
DC51b 9.0 14 mA 85°C
DC51c 9.0 14 mA 125°C
DC51e 17 26 mA 25°C
5VDC51f 16 26 mA 85°C
DC51g 16 26 mA 125°C
DC50a 11 18 mA 25°C
3.3V
(1.8 MIPS)
FRC (7.37 MHz)
DC50b 12 18 mA 85°C
DC50c 11 18 mA 125°C
DC50e 25 38 mA 25°C
5VDC50f 24 38 mA 85°C
DC50g 23 38 mA 125°C
DC43a 19 30 mA 25°C
3.3V
4 MIPS
DC43b 20 30 mA 85°C
DC43c 20 30 mA 125°C
DC43e 34 51 mA 25°C
5VDC43f 33 51 mA 85°C
DC43g 33 51 mA 125°C
DC44a 34 53 mA 25°C
3.3V
10 MIPS
DC44b 35 53 mA 85°C
DC44c 35 53 mA 125°C
DC44e 59 89 mA 25°C
5VDC44f 59 89 mA 85°C
DC44g 59 89 mA 125°C
DC47a 59 70 mA 25°C
3.3V
20 MIPS
DC47b 60 70 mA 85°C
DC47d 99 115 mA 25°C
5VDC47e 99 115 mA 85°C
DC47f 100 115 mA 125°C
DC49a 138 155 mA 25°C
5V 30 MIPS
DC49b 139 155 mA 85°C
Note 1: Data in “Typical” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: Base I
IDLE current is measured with Core off, Clock on and all modules turned off.
3: The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature also have
an impact on the current consumption. The test conditions for all I
DD measurements are as follows: OSC1
driven with external square wave from rail-to-rail. All I/O pins are configured as Inputs and pulled to V
DD.
MCLR
= VDD, WDT, FSCM, LVD and BOR are disabled. CPU, SRAM, Program Memory and Data
Memory are operational. No peripheral modules are operating.