Datasheet

dsPIC30F5015/5016
DS70149E-page 182 © 2011 Microchip Technology Inc.
TABLE 24-8: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Power Down Current (I
PD)
(2)
DC60a 0.2 — μA 25°C
3.3V
Base Power Down Current
DC60b 0.7 40 μA 85°C
DC60c 12 65 μA125°C
DC60e 0.4 — μA 25°C
5VDC60f 1.7 55 μA 85°C
DC60g 16 90 μA125°C
DC61a 10 30 μA 25°C
3.3V
Watchdog Timer Current: ΔI
WDT
(3)
DC61b 12 30 μA 85°C
DC61c 12 30 μA125°C
DC61e 20 40 μA 25°C
5VDC61f 22 40 μA 85°C
DC61g 23 40 μA125°C
DC62a 4 10 μA 25°C
3.3V
Timer 1 w/32 kHz Crystal: ΔI
TI32
(3)
DC62b 5 10 μA 85°C
DC62c 4 10 μA125°C
DC62e 4 15 μA 25°C
5VDC62f 6 15 μA 85°C
DC62g 5 15 μA125°C
DC63a 33 65 μA 25°C
3.3V
BOR On: ΔI
BOR
(3)
DC63b 38 65 μA 85°C
DC63c 39 65 μA125°C
DC63e 38 70 μA 25°C
5VDC63f 41 70 μA 85°C
DC63g 42 70 μA125°C
Note 1: Data in “Typ” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
2: These parameters are characterized but not tested in manufacturing.
3: The Δ current is the additional current consumed when the module is enabled. This current should be
added to the base I
PD current.