Datasheet

dsPIC30F5015/5016
DS70149E-page 180 © 2011 Microchip Technology Inc.
TABLE 24-6: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Operating Current (I
DD)
(2)
DC31a 5.6 10 mA 25°C
3.3V
0.128 MIPS
LPRC (512 kHz)
DC31b 5.7 10 mA 85°C
DC31c 5.5 10 mA 125°C
DC31e 14 23 mA 25°C
5VDC31f 15 23 mA 85°C
DC31g 15 23 mA 125°C
DC30a 10 21 mA 25°C
3.3V
(1.8 MIPS)
FRC (7.37 MHz)
DC30b 12 21 mA 85°C
DC30c 14 21 mA 125°C
DC30e 23 38 mA 25°C
5VDC30f 24 38 mA 85°C
DC30g 25 38 mA 125°C
DC23a 30 50 mA 25°C
3.3V
4 MIPS
DC23b 32 50 mA 85°C
DC23c 35 50 mA 125°C
DC23e 32 53 mA 25°C
5VDC23f 34 53 mA 85°C
DC23g 35 53 mA 125°C
DC24a 35 60 mA 25°C
3.3V
10 MIPS
DC24b 37 60 mA 85°C
DC24c 40 60 mA 125°C
DC24e 62 95 mA 25°C
5VDC24f 63 95 mA 85°C
DC24g 65 95 mA 125°C
DC27a 63 95 mA 25°C
3.3V
20 MIPS
DC27b 65 95 mA 85°C
DC27d 108 145 mA 25°C
5VDC27e 127 145 mA 85°C
DC27f 130 145 mA 125°C
DC29a 151 200 mA 25°C
5V 30 MIPS
DC29b 170 200 mA 85°C
Note 1: Data in “Typical” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature also have
an impact on the current consumption. The test conditions for all I
DD measurements are as follows: OSC1
driven with external square wave from rail to rail. All I/O pins are configured as Inputs and pulled to V
DD.
MCLR
= VDD, WDT, FSCM, LVD and BOR are disabled. CPU, SRAM, Program Memory and Data
Memory are operational. No peripheral modules are operating.