Datasheet

© 2011 Microchip Technology Inc. DS70116J-page 175
dsPIC30F5011/5013
TABLE 23-15: PLL CLOCK TIMING SPECIFICATIONS (VDD = 2.5 TO 5.5 V)
AC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Param
No.
Symbol Characteristic
(1)
Min Typ
(2)
Max Units Conditions
OS50 F
PLLI PLL Input Frequency Range
(2)
4 — 10 MHz EC, XT, FRC modes with PLL
OS51 F
SYS On-Chip PLL Output
(2)
16 — 120 MHz EC, XT, FRC modes with PLL
OS52 T
LOC PLL Start-up Time (Lock Time) — 20 50 μs
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typ” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
TABLE 23-16: PLL JITTER
AC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ T
A ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
No.
Characteristic Min Typ
(1)
Max Units Conditions
OS61 x4 PLL — 0.251 0.413 % -40°C ≤ TA ≤ +85°C VDD = 3.0 to 3.6V
— 0.251 0.413 % -40°C ≤ T
A ≤ +125°C VDD = 3.0 to 3.6V
— 0.256 0.47 % -40°C ≤ TA ≤ +85°C VDD = 4.5 to 5.5V
— 0.256 0.47 % -40°C ≤ T
A ≤ +125°C VDD = 4.5 to 5.5V
x8 PLL — 0.355 0.584 % -40°C ≤ T
A ≤ +85°C VDD = 3.0 to 3.6V
— 0.355 0.584 % -40°C ≤ TA ≤ +125°C VDD = 3.0 to 3.6V
— 0.362 0.664 % -40°C ≤ T
A ≤ +85°C VDD = 4.5 to 5.5V
— 0.362 0.664 % -40°C ≤ T
A ≤ +125°C VDD = 4.5 to 5.5V
x16 PLL — 0.67 0.92 % -40°C ≤ TA ≤ +85°C VDD = 3.0 to 3.6V
— 0.632 0.956 % -40°C ≤ T
A ≤ +85°C VDD = 4.5 to 5.5V
— 0.632 0.956 % -40°C ≤ T
A ≤ +125°C VDD = 4.5 to 5.5V
Note 1: These parameters are characterized but not tested in manufacturing.