Datasheet

dsPIC30F5011/5013
DS70116J-page 166 © 2011 Microchip Technology Inc.
DC23a 13.5 20 mA 25°C
3.3V
4 MIPS
DC23b 14 21 mA 85°C
DC23c 15 22.5 mA 125°C
DC23e 23 34.5 mA 25°C
5VDC23f 23.5 35 mA 85°C
DC23g 24 36 mA 125°C
DC24a 32 48 mA 25°C
3.3V
10 MIPS
DC24b 32.5 49 mA 85°C
DC24c 33 49.5 mA 125°C
DC24e 53.5 80 mA 25°C
5VDC24f 54 81 mA 85°C
DC24g 54 81 mA 125°C
DC27d 101 152 mA 25°C
5V 20 MIPSDC27e 100 150 mA 85°C
DC27f 100 150 mA 125°C
DC29a 145 217 mA 25°C
5V 30 MIPS
DC29b 144 216 mA 85°C
TABLE 23-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Operating Current (I
DD)
(2)
Note 1: Data in “Typical” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature also have
an impact on the current consumption. The test conditions for all I
DD measurements are as follows: OSC1
driven with external square wave from rail to rail. All I/O pins are configured as Inputs and pulled to V
DD.
MCLR = VDD, WDT, FSCM, LVD and BOR are disabled. CPU, SRAM, Program Memory and Data Memory
are operational. No peripheral modules are operating.