Datasheet

dsPIC30F3014/4013
DS70138G-page 200  2010 Microchip Technology Inc.
TABLE 23-33: SPI MODULE SLAVE MODE (CKE = 1) TIMING REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Symbol Characteristic
(1)
Min Typ
(2)
Max Units Conditions
SP70 TscL SCK
X Input Low Time 30 — — ns
SP71 TscH SCK
X Input High Time 30 — — ns
SP72 TscF SCKX Input Fall Time
(3)
— — 25 ns
SP73 TscR SCKX Input Rise Time
(3)
— — 25 ns
SP30 TdoF SDO
X Data Output Fall Time
(3)
— — — ns See parameter
DO32
SP31 TdoR SDO
X Data Output Rise Time
(3)
— — — ns See parameter
DO31
SP35 TscH2do,
TscL2doV
SDO
X Data Output Valid after
SCK
X Edge
— — 30 ns
SP40 TdiV2scH,
TdiV2scL
Setup Time of SDI
X Data Input
to SCK
X Edge
20 — — ns
SP41 TscH2diL,
TscL2diL
Hold Time of SDIX Data Input
to SCK
X Edge
20 — — ns
SP50 TssL2scH,
TssL2scL
SS
X to SCKX or SCKX Input 120 — — ns
SP51 TssH2doZ SSx
 to SDOX Output
High-Impedance
(4)
10 — 50 ns
SP52 TscH2ssH
TscL2ssH
SS
X after SCKX Edge 1.5 TCY + 40 — — ns
SP60 TssL2doV SDO
X Data Output Valid after
SCK
X Edge
— — 50 ns
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typ” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
3: The minimum clock period for SCKx is 100 ns. Therefore, the clock generated in Master mode must not
violate this specification.
4: Assumes 50 pF load on all SPI pins.