Datasheet

dsPIC30F3014/4013
DS70138G-page 14  2010 Microchip Technology Inc.
RA11 I/O ST PORTA is a bidirectional I/O port.
RB0-RB12 I/O ST PORTB is a bidirectional I/O port.
RC13-RC15 I/O ST PORTC is a bidirectional I/O port.
RD0-RD3,
RD8, RD9
I/O ST PORTD is a bidirectional I/O port.
RF0-RF5 I/O ST PORTF is a bidirectional I/O port.
SCK1
SDI1
SDO1
SS1
I/O
I
O
I
ST
ST
—
ST
Synchronous serial clock input/output for SPI1.
SPI1 data in.
SPI1 data out.
SPI1 slave synchronization.
SCL
SDA
I/O
I/O
ST
ST
Synchronous serial clock input/output for I
2
C™.
Synchronous serial data input/output for I
2
C.
SOSCO
SOSCI
O
I
—
ST/CMOS
32 kHz low-power oscillator crystal output.
32 kHz low-power oscillator crystal input. ST buffer when configured in RC
mode; CMOS otherwise.
T1CK
T2CK
I
I
ST
ST
Timer1 external clock input.
Timer2 external clock input.
U1RX
U1TX
U1ARX
U1ATX
I
O
I
O
ST
—
ST
—
UART1 receive.
UART1 transmit.
UART1 alternate receive.
UART1 alternate transmit.
VDD P — Positive supply for logic and I/O pins.
V
SS P — Ground reference for logic and I/O pins.
VREF+ I Analog Analog voltage reference (high) input.
VREF- I Analog Analog voltage reference (low) input.
TABLE 1-1: PINOUT I/O DESCRIPTIONS (CONTINUED)
Pin Name
Pin
Type
Buffer
Type
Description
Legend: CMOS = CMOS compatible input or output Analog = Analog input
ST = Schmitt Trigger input with CMOS levels O = Output
I = Input P = Power