Datasheet

dsPIC30F3014/4013
DS70138G-page 178  2010 Microchip Technology Inc.
FIGURE 23-1: LOW-VOLTAGE DETECT CHARACTERISTICS
TABLE 23-9: DC CHARACTERISTICS: I/O PIN OUTPUT SPECIFICATIONS
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C  T
A  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Param
No.
Symbol Characteristic Min Typ
(1)
Max Units Conditions
V
OL Output Low Voltage
(2)
DO10 I/O Ports — — 0.6 V IOL = 8.5 mA, VDD = 5V
——0.15VIOL = 2.0 mA, VDD = 3V
DO16 OSC2/CLKO — — 0.6 V I
OL = 1.6 mA, VDD = 5V
(RC or EC Oscillator mode) — — 0.72 V IOL = 2.0 mA, VDD = 3V
VOH Output High Voltage
(2)
DO20 I/O Ports VDD – 0.7 — — V IOH = -3.0 mA, VDD = 5V
VDD – 0.2 — — V IOH = -2.0 mA, VDD = 3V
DO26 OSC2/CLKO VDD – 0.7 — — V IOH = -1.3 mA, VDD = 5V
(RC or EC Oscillator mode) V
DD – 0.1 — — V IOH = -2.0 mA, VDD = 3V
Capacitive Loading Specs
on Output Pins
(2)
DO50 COSC2 OSC2/SOSC2 Pin — — 15 pF In XTL, XT, HS and LP modes
when external clock is used to
drive OSC1.
DO56 C
IO All I/O Pins and OSC2 — — 50 pF RC or EC Oscillator mode
DO58 CB SCL, SDA — — 400 pF In I
2
C mode
Note 1: Data in “Typ” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only and
are not tested.
2: These parameters are characterized but not tested in manufacturing.
LV10
LVDIF
VDD
(LVDIF set by hardware)