Datasheet

dsPIC30F3014/4013
DS70138G-page 174  2010 Microchip Technology Inc.
TABLE 23-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C  TA  +85°C for Industrial
-40°C  T
A  +125°C for Extended
Parameter
No.
Typical Max Units Conditions
Operating Current (I
DD)
(1)
DC31a 2 4 mA 25°C
3.3V
0.128 MIPS
LPRC (512 kHz)
DC31b 2 4 mA 85°C
DC31c 2 4 mA 125°C
DC31e 4 6 mA 25°C
5VDC31f 4 6 mA 85°C
DC31g 4 6 mA 125°C
DC30a 6 11 mA 25°C
3.3V
1.8 MIPS
FRC (7.37 MHz)
DC30b 6 11 mA 85°C
DC30c 7 11 mA 125°C
DC30e 11 16 mA 25°C
5VDC30f 11 16 mA 85°C
DC30g 11 16 mA 125°C
DC23a 13 20 mA 25°C
3.3V
4 MIPS
DC23b 13 20 mA 85°C
DC23c 14 20 mA 125°C
DC23e 22 31 mA 25°C
5VDC23f 22 31 mA 85°C
DC23g 22 31 mA 125°C
DC24a 27 39 mA 25°C
3.3V
10 MIPS
DC24b 28 39 mA 85°C
DC24c 28 39 mA 125°C
DC24e 46 64 mA 25°C
5VDC24f 46 64 mA 85°C
DC24g 46 64 mA 125°C
DC27d 86 120 mA 25°C
5V 20 MIPSDC27e 85 120 mA 85°C
DC27f 85 120 mA 125°C
DC29a 123 170 mA 25°C
5V 30 MIPS
DC29b 122 170 mA 85°C
Note 1: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature, also have
an impact on the current consumption. The test conditions for all I
DD measurements are as follows: OSC1
driven with external square wave from rail-to-rail. All I/O pins are configured as inputs and pulled to V
DD.
MCLR
= VDD, WDT, FSCM, LVD and BOR are disabled. CPU, SRAM, program memory and data memory
are operational. No peripheral modules are operating.