Datasheet

dsPIC30F4011/4012
DS70135G-page 180 © 2010 Microchip Technology Inc.
TABLE 24-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Operating Current (I
DD)
(2)
DC31a 2 4 mA +25°C
3.3V
0.128 MIPS
LPRC (512 kHz)
DC31b 2 4 mA +85°C
DC31c 2 4 mA +125°C
DC31e 3 5 mA +25°C
5VDC31f 3 5 mA +85°C
DC31g 3 5 mA +125°C
DC30a 4 6 mA +25°C
3.3V
(1.8 MIPS)
FRC (7.37 MHz)
DC30b 4 6 mA +85°C
DC30c 4 6 mA +125°C
DC30e 7 10 mA +25°C
5VDC30f 7 10 mA +85°C
DC30g 7 10 mA +125°C
DC23a 12 19 mA +25°C
3.3V
4 MIPS
DC23b 12 19 mA +85°C
DC23c 13 19 mA +125°C
DC23e 19 31 mA +25°C
5VDC23f 20 31 mA +85°C
DC23g 20 31 mA +125°C
DC24a 28 39 mA +25°C
3.3V
10 MIPS
DC24b 28 39 mA +85°C
DC24c 29 39 mA +125°C
DC24e 46 64 mA +25°C
5VDC24f 46 64 mA +85°C
DC24g 47 64 mA +125°C
DC27a 53 72 mA +25°C
3.3V
20 MIPS
DC27b 53 72 mA +85°C
DC27d 87 120 mA +25°C
5VDC27e 87 120 mA +85°C
DC27f 87 120 mA +125°C
DC29a 124 170 mA +25°C
5V 30 MIPS
DC29b 125 170 mA +85°C
Note 1: Data in “Typical” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature, also have
an impact on the current consumption. The test conditions for all I
DD measurements are as follows: OSC1
driven with external square wave from rail to rail. All I/O pins are configured as inputs and pulled to V
DD.
MCLR
= VDD, WDT, FSCM, LVD and BOR are disabled. CPU, SRAM, program memory and data memory
are operational. No peripheral modules are operating.