Datasheet

© 2010 Microchip Technology Inc. DS70135G-page 181
dsPIC30F4011/4012
TABLE 24-6: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V (unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Parameter
No.
Typical
(1,2)
Max Units Conditions
Operating Current (IDD)
(3)
DC51a 1.3 3 mA +25°C
3.3V
0.128 MIPS
LPRC (512 kHz)
DC51b 1.3 3 mA +85°C
DC51c 1.3 3 mA +125°C
DC51e 2.7 5 mA +25°C
5VDC51f 2.7 5 mA +85°C
DC51g 2.7 5 mA +125°C
DC50a 4 6 mA +25°C
3.3V
(1.8 MIPS)
FRC (7.37 MHz)
DC50b 4 6 mA +85°C
DC50c 4 6 mA +125°C
DC50e 7 11 mA +25°C
5VDC50f 7 11 mA +85°C
DC50g 7 11 mA +125°C
DC43a 7 11 mA +25°C
3.3V
4 MIPS
DC43b 7 11 mA +85°C
DC43c 7 11 mA +125°C
DC43e 12 17 mA +25°C
5VDC43f 12 17 mA +85°C
DC43g 12 17 mA +125°C
DC44a 15 22 mA +25°C
3.3V
10 MIPS
DC44b 15 22 mA +85°C
DC44c 16 22 mA +125°C
DC44e 26 36 mA +25°C
5VDC44f 27 36 mA +85°C
DC44g 27 36 mA +125°C
DC47a 30 40 mA +25°C
3.3V
20 MIPS
DC47b 30 40 mA +85°C
DC47d 50 65 mA +25°C
5VDC47e 50 65 mA +85°C
DC47f 51 65 mA +125°C
DC49a 72 95 mA +25°C
5V 30 MIPS
DC49b 73 95 mA +85°C
Note 1: Data in “Typical” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: Base I
IDLE current is measured with core off, clock on and all modules turned off.