Datasheet

dsPIC30F3010/3011
DS70141F-page 172 © 2010 Microchip Technology Inc.
TABLE 23-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Operating Current (I
DD)
(2)
DC31a 1.4 2.5 mA 25°C
3.3V
0.128 MIPS
LPRC (512 kHz)
DC31b 1.4 2.5 mA 85°C
DC31c 1.4 2.5 mA 125°C
DC31e 3.0 4.5 mA 25°C
5VDC31f 2.8 4.5 mA 85°C
DC31g 2.8 4.5 mA 125°C
DC30a 3.2 5.0 mA 25°C
3.3V
1.8 MIPS
FRC (7.37MHz)
DC30b 3.3 5.0 mA 85°C
DC30c 3.3 5.0 mA 125°C
DC30e 6.0 9.0 mA 25°C
5VDC30f 5.9 9.0 mA 85°C
DC30g 5.9 9.0 mA 125°C
DC23a 10.0 17.0 mA 25°C
3.3V
4 MIPS
DC23b 10.0 17.0 mA 85°C
DC23c 11.0 17.0 mA 125°C
DC23e 17.0 27.0 mA 25°C
5VDC23f 17.0 27.0 mA 85°C
DC23g 18.0 27.0 mA 125°C
DC24a 24.0 38.0 mA 25°C
3.3V
10 MIPS
DC24b 25.0 38.0 mA 85°C
DC24c 25.0 38.0 mA 125°C
DC24e 41.0 62.0 mA 25°C
5VDC24f 41.0 62.0 mA 85°C
DC24g 41.0 62.0 mA 125°C
DC27a 46.0 70.0 mA 25°C
3.3V
20 MIPS
DC27b 46.0 70.0 mA 85°C
DC27d 76.0 115.0 mA 25°C
5VDC27e 76.0 115.0 mA 85°C
DC27f 76.0 115.0 mA 125°C
DC29a 109.0 155.0 mA 25°C
5V 30 MIPS
DC29b 108.0 155.0 mA 85°C
Note 1: Data in “Typical” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors, such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature, also have
an impact on the current consumption. The test conditions for all I
DD measurements are as follows: OSC1
driven with external square wave from rail to rail. All I/O pins are configured as inputs and pulled to VDD.
MCLR
= VDD, WDT, FSCM, LVD and BOR are disabled. CPU, SRAM, program memory and data memory
are operational. No peripheral modules are operating.