Datasheet

© 2006 Microchip Technology Inc. Preliminary DS70178C-page 237
dsPIC30F1010/202X
TABLE 21-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 3.3V and 5.0V (±10%)
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Power-Down Current (I
PD)
DC60a 1.2 2.4 mA 25°C
3.3V
Base Power-Down Current
(2)
DC60b 1.2 2.4 mA 85°C
DC60c 1.3 2.6 mA 125°C
DC60e 2.1 4.2 mA 25°C
5VDC60f 2.1 4.2 mA 85°C
DC60g 2.3 4.6 mA 125°C
DC61a 15 30 μA 25°C
3.3V
Watchdog Timer Current: ΔI
WDT
(3)
DC61b 14 30 μA 85°C
DC61c 14 30 μA 125°C
DC61e 30 60 μA 25°C
5VDC61f 29 60 μA 85°C
DC61g 30 60 μA 125°C
Note 1: Data in the Typical column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance
only and are not tested.
2: Base I
PD is measured with all peripherals and clocks shutdown. All I/Os are configured as inputs and
pulled high. WDT, etc. are all switched off.
3: The Δ current is the additional current consumed when the module is enabled. This current should be
added to the base I
PD current.