Datasheet

dsPIC30F1010/202X
DS70178C-page 234 Preliminary © 2006 Microchip Technology Inc.
DC28a 96 116 mA 25°C
3.3V
EC, 20 MIPS, PLL enabled
DC28b 97 116 mA 85°C
DC28d 157 188 mA 25°C
5VDC28e 158 189 mA 85°C
DE28f 159 191 mA 125°C
DC29d 227 273 mA 25°C
5V EC, 30 MIPS, PLL enabled
DC29e 228 273 mA 85°C
TABLE 21-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD) (CONTINUED)
DC CHARACTERISTICS
Standard Operating Conditions: 3.3V and 5.0V (±10%)
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Operating Current (I
DD)
(2)
Note 1: Data in “Typical” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature also have
an impact on the current consumption. The test conditions for all I
DD measurements are as follows:
- All I/O pins are configured as Outputs and pulled to V
SS.
- M
CLR = VDD, WDT and FSCM are disabled.
- CPU, SRAM, Program Memory and Data Memory are operational.
- No peripheral modules are operating.