Datasheet

© 2006 Microchip Technology Inc. Preliminary DS70178C-page 233
dsPIC30F1010/202X
TABLE 21-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 3.3V and 5.0V (±10%)
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Operating Current (IDD)
(2)
DC20a 13 16 mA 25°C
3.3V
FRC 3.2 MIPS, PLL disabled
DC20b 14 16 mA 85°C
DC20c 14 17 mA 125°C
DC20d 22 26 mA 25°C
5VDC20e 22 26 mA 85°C
DC20f 22 27 mA 125°C
DC22a 19 22 mA 25°C
3.3V
FRC, 4.9 MIPS, PLL disabled
DC22b 19 23 mA 85°C
DC22c 19 23 mA 125°C
DC22d 30 36 mA 25°C
5VDC22e 30 37 mA 85°C
DC22f 31 37 mA 125°C
DC23a 27 33 mA 25°C
3.3V
FRC, 7.3 MIPS, PLL disabled
DC23b 28 33 mA 85°C
DC23c 28 34 mA 125°C
DC23d 44 53 mA 25°C
5VDC23e 45 53 mA 85°C
DC23f 45 54 mA 125°C
DC24a 66 79 mA 25°C
3.3V
FRC 13 MIPS, PLL enabled
DC24b 67 80 mA 85°C
DC24c 68 81 mA 125°C
DC24d 108 129 mA 25°C
5VDC24e 109 130 mA 85°C
DC24f 110 131 mA 125°C
DC26a 98 118 mA 25°C
3.3V
FRC 20 MIPS, PLL enabled
DC26b 99 118 mA 85°C
DC26d 159 191 mA 25°C
5VDC26e 160 192 mA 85°C
DC26f 161 193 mA 125°C
DC27d 222 267 mA 25°C
5V FRC, 30 MIPS, PLL enabled
DC27e 223 267 mA 85°C
Note 1: Data in “Typical” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature also have
an impact on the current consumption. The test conditions for all I
DD measurements are as follows:
- All I/O pins are configured as Outputs and pulled to V
SS.
- M
CLR = VDD, WDT and FSCM are disabled.
- CPU, SRAM, Program Memory and Data Memory are operational.
- No peripheral modules are operating.