Datasheet

dsPIC30F1010/202X

bit 4 RIDLE: Receiver Idle bit (Read-Only)

1 = Receiver is Idle

0 = Receiver is active

bit 3 PERR: Parity Error Status bit (Read-Only)

1 = Parity error has been detected for the current character (character at the top of the receive FIFO)

0 = Parity error has not been detected

bit 2 FERR: Framing Error Status bit (Read-Only)

1 = Framing error has been detected for the current character (character at the top of the receive

FIFO)

0 = Framing error has not been detected

bit 1 OERR: Receive Buffer Overrun Error Status bit (Read/Clear-Only)

1 = Receive buffer has overflowed

0 = Receive buffer has not overflowed (clearing a previously set OERR bit (1 → 0 transition) will reset

the receiver buffer and the RSR to the empty state)

bit 0 URXDA: Receive Buffer Data Available bit (Read-Only)

1 = Receive buffer has data, at least one more character can be read

0 = Receive buffer is empty