Datasheet

ManualsBrandsMICROCHIP TECHNOLOGY ManualsMicrocontrollers, Microprocessors & QuartzesEmbedded microcontroller SOIC 28 16-Bit 20 null I/O number 20

dsPIC30F2011/2012/3012/3013

12.0 OUTPUT COMPARE MODULE

This section describes the output compare module and

associated operational modes. The features provided

by this module are useful in applications requiring

operational modes, such as:

• Generation of Variable Width Output Pulses

• Power Factor Correction

Figure 12-1 depicts a block diagram of the output

compare module.

The key operational features of the output compare

module include:

• Timer2 and Timer3 Selection mode

• Simple Output Compare Match mode

• Dual Output Compare Match mode

• Simple PWM mode

• Output Compare During Sleep and Idle modes

• Interrupt on Output Compare/PWM Event

These operating modes are determined by setting the

appropriate bits in the 16-bit OC1CON and OC2CON

registers. The dsPIC30F2011/2012/3012/3013 devices

have 2 compare channels.

OCxRS and OCxR in Figure 12-1 represent the Dual

Compare registers. In the Dual Compare mode, the

OCxR register is used for the first compare and OCxRS

is used for the second compare.

FIGURE 12-1: OUTPUT COMPARE MODE BLOCK DIAGRAM

(1)

Note: This data sheet summarizes features of

this group of dsPIC30F devices and is not

intended to be a complete reference

source. For more information on the CPU,

peripherals, register descriptions and

general device functionality, refer to the

“dsPIC30F Family Reference Manual”

(DS70046).

OCxR

Comparator

Output

Logic

OCM<2:0>

Output

OCx

Set Flag bit

OCxIF

OCxRS

Mode Select

Note 1: Where ‘x’ is shown, reference is made to the registers associated with the respective output compare

channel (1 or 2).

OCFA

OCTSEL

T2P2_MATCHTMR2<15:0 TMR3<15:0> T3P3_MATCH

From GP

(for x = 1, 2, 3 or 4)

Timer Module

Enable