Datasheet

© 2010 Microchip Technology Inc. DS70139G-page 153
dsPIC30F2011/2012/3012/3013
TABLE 20-6: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Operating Current (I
DD)
(2)
DC51a 1.3 2.5 mA 25°C
3.3V
0.128 MIPS
LPRC (512 kHz)
DC51b 1.3 2.5 mA 85°C
DC51c 1.2 2.5 mA 125°C
DC51e 3.2 5.0 mA 25°C
5VDC51f 2.9 5.0 mA 85°C
DC51g 2.8 5.0 mA 125°C
DC50a 3.0 5.0 mA 25°C
3.3V
(1.8 MIPS)
FRC (7.37 MHz)
DC50b 3.0 5.0 mA 85°C
DC50c 3.0 5.0 mA 125°C
DC50e 6.0 9.0 mA 25°C
5VDC50f 5.8 9.0 mA 85°C
DC50g 5.7 9.0 mA 125°C
DC43a 5.2 8.0 mA 25°C
3.3V
4 MIPS
DC43b 5.3 8.0 mA 85°C
DC43c 5.4 8.0 mA 125°C
DC43e 9.7 15.0 mA 25°C
5VDC43f 9.6 15.0 mA 85°C
DC43g 9.5 15.0 mA 125°C
DC44a 11.0 17.0 mA 25°C
3.3V
10 MIPS
DC44b 11.0 17.0 mA 85°C
DC44c 11.0 17.0 mA 125°C
DC44e 19.0 29.0 mA 25°C
5VDC44f 19.0 29.0 mA 85°C
DC44g 20.0 30.0 mA 125°C
DC47a 20.0 35.0 mA 25°C
3.3V
20 MIPS
DC47b 21.0 35.0 mA 85°C
DC47d 35.0 50.0 mA 25°C
5VDC47e 36.0 50.0 mA 85°C
DC47f 36.0 50.0 mA 125°C
DC49a 51.0 70.0 mA 25°C
5V 30 MIPS
DC49b 51.0 70.0 mA 85°C
Note 1: Data in “Typical” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: Base I
IDLE current is measured with Core off, Clock on and all modules turned off.