Datasheet

dsPIC30F2011/2012/3012/3013
DS70139G-page 152 © 2010 Microchip Technology Inc.
TABLE 20-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Parameter
No.
Typical
(1)
Max Units Conditions
Operating Current (I
DD)
(2)
DC31a 1.6 3.0 mA 25°C
3.3V
0.128 MIPS
LPRC (512 kHz)
DC31b 1.6 3.0 mA 85°C
DC31c 1.6 3.0 mA 125°C
DC31e 3.6 6.0 mA 25°C
5VDC31f 3.3 6.0 mA 85°C
DC31g 3.2 6.0 mA 125°C
DC30a 3.0 5.0 mA 25°C
3.3V
(1.8 MIPS)
FRC (7.37 MHz)
DC30b 3.0 5.0 mA 85°C
DC30c 3.1 5.0 mA 125°C
DC30e 6.0 9.0 mA 25°C
5VDC30f 5.8 9.0 mA 85°C
DC30g 5.7 9.0 mA 125°C
DC23a 9.0 15.0 mA 25°C
3.3V
4 MIPS
DC23b 10.0 15.0 mA 85°C
DC23c 10.0 15.0 mA 125°C
DC23e 16.0 24.0 mA 25°C
5VDC23f 16.0 24.0 mA 85°C
DC23g 16.0 24.0 mA 125°C
DC24a 22.0 33.0 mA 25°C
3.3V
10 MIPS
DC24b 22.0 33.0 mA 85°C
DC24c 22.0 33.0 mA 125°C
DC24e 37.0 56.0 mA 25°C
5VDC24f 37.0 56.0 mA 85°C
DC24g 37.0 56.0 mA 125°C
DC27a 41.0 60.0 mA 25°C
3.3V
20 MIPS
DC27b 40.0 60.0 mA 85°C
DC27d 68.0 90.0 mA 25°C
5VDC27e 67.0 90.0 mA 85°C
DC27f 66.0 90.0 mA 125°C
DC29a 96.0 140.0 mA 25°C
5V 30 MIPS
DC29b 94.0 140.0 mA 85°C
Note 1: Data in “Typical” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature also have
an impact on the current consumption. The test conditions for all I
DD measurements are as follows: OSC1
driven with external square wave from rail to rail. All I/O pins are configured as Inputs and pulled to V
DD.
MCLR
= VDD, WDT, FSCM, LVD and BOR are disabled. CPU, SRAM, Program Memory and Data
Memory are operational. No peripheral modules are operating.