Datasheet

dsPIC30F2010
DS70118J-page 162 © 2011 Microchip Technology Inc.
FIGURE 22-6: BAND GAP START-UP TIME CHARACTERISTICS
TABLE 22-21: BAND GAP START-UP TIME REQUIREMENTS
AC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Param
No.
Symbol Characteristic
(1)
Min Typ
(2)
Max Units Conditions
SY40 T
BGAP Band Gap Start-up Time — 40 65 µs Defined as the time between the
instant that the band gap is enabled
and the moment that the band gap
reference voltage is stable.
RCON<13>Status bit
Note 1: These parameters are characterized but not tested in manufacturing.
2: Data in “Typ” column is at 5V, 25°C unless otherwise stated.
VBGAP
Enable Band Gap
Band Gap
0V
(see Note)
Stable
Note: Band Gap is enabled when FBORPOR<7> is set.
SY40