Datasheet

dsPIC30F2010
DS70118J-page 152 © 2011 Microchip Technology Inc.
TABLE 22-7: DC CHARACTERISTICS: POWER-DOWN CURRENT (IPD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Parameter
No.
Typical Max Units Conditions
Power Down Current (I
PD)
(1)
DC60a 0.05 — μA 25°C
3.3V
Base Power Down Current
(2)
DC60b 3 25 μA 85°C
DC60c 20 50 μA125°C
DC60e 0.1 — μA 25°C
5VDC60f 6 35 μA 85°C
DC60g 40 200 μA125°C
DC61a 30 45 μA 25°C
3.3V
Watchdog Timer Current: ΔI
WDT
(2)
DC61b 34 51 μA 85°C
DC61c 46 69 μA125°C
DC61e 35 53 μA 25°C
5VDC61f 39 59 μA 85°C
DC61g 40 60 μA125°C
DC62a 4 10 μA 25°C
3.3V
Timer 1 w/32 kHz Crystal: ΔI
TI32
(2)
DC62b 5 10 μA 85°C
DC62c 4 10 μA125°C
DC62e 4 15 μA 25°C
5VDC62f 6 15 μA 85°C
DC62g 5 15 μA125°C
DC63a 4 6 μA 25°C
3.3V
BOR On: ΔI
BOR
(2)
DC63b 4 6 μA 85°C
DC63c 5 7.5 μA125°C
DC63e 10 15 μA 25°C
5VDC63f 9 15 μA 85°C
DC63g 10 15 μA125°C
Note 1: Base I
PD is measured with all peripherals and clocks shut down. All I/Os are configured as inputs and
pulled high. LVD, BOR, WDT, etc. are all switched off.
2: The Δ current is the additional current consumed when the module is enabled. This current should be
added to the base I
PD current.