Datasheet

© 2011 Microchip Technology Inc. DS70118J-page 151
dsPIC30F2010
TABLE 22-6: DC CHARACTERISTICS: IDLE CURRENT (IIDLE)
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ T
A ≤ +125°C for Extended
Parameter
No.
Typical Max Units Conditions
Operating Current (IDD)
(1)
DC51a 1.5 3.0 mA 25°C
3.3V
0.128 MIPS
LPRC (512 kHz)
DC51b 1.5 3.0 mA 85°C
DC51c 1.5 3.0 mA 125°C
DC51e 4.1 7 mA 25°C
5VDC51f 3.6 7 mA 85°C
DC51g 3.5 7 mA 125°C
DC50a 3 5 mA 25°C
3.3V
(1.8 MIPS)
FRC (7.37MHz)
DC50b 3 5 mA 85°C
DC50c 3 5 mA 125°C
DC50e 7 9 mA 25°C
5VDC50f 6 9 mA 85°C
DC50g 6 9 mA 125°C
DC43a 5 9 mA 25°C
3.3V
4 MIPS EC mode, 4X PLL
DC43b 6 9 mA 85°C
DC43c 6 9 mA 125°C
DC43e 10 15 mA 25°C
5VDC43f 10 15 mA 85°C
DC43g 10 15 mA 125°C
DC44a 11 18 mA 25°C
3.3V
10 MIPS EC mode, 4X PLL
DC44b 12 18 mA 85°C
DC44c 12 18 mA 125°C
DC44e 20 30 mA 25°C
5VDC44f 20 30 mA 85°C
DC44g 20 30 mA 125°C
DC47a 20 30 mA 25°C
3.3V
20 MIPS EC mode, 8X PLL
DC47b 21 30 mA 85°C
DC47d 35 45 mA 25°C
5VDC47e 35 45 mA 85°C
DC47f 35 45 mA 125°C
DC49a 49 65 mA 25°C
5V 30 MIPS EC mode, 16X PLL
DC49b 50 65 mA 85°C
Note 1: Data in “Typical” column is at 5V, 25°C unless otherwise stated. Parameters are for design guidance only
and are not tested.
2: Base I
IDLE current is measured with core off, clock on and all modules turned off.