Datasheet

dsPIC30F2010
DS70118J-page 150 © 2011 Microchip Technology Inc.
TABLE 22-5: DC CHARACTERISTICS: OPERATING CURRENT (IDD)
DC CHARACTERISTICS
Standard Operating Conditions: 2.5V to 5.5V
(unless otherwise stated)
Operating temperature -40°C ≤ TA ≤ +85°C for Industrial
-40°C ≤ TA ≤ +125°C for Extended
Parameter
No.
Typical Max Units Conditions
Operating Current (I
DD)
(1)
DC31a 1.6 3 mA 25°C
3.3V
0.128 MIPS
LPRC (512 kHz)
DC31b 1.6 3 mA 85°C
DC31c 1.6 3 mA 125°C
DC31e 3.9 7 mA 25°C
5VDC31f 3.5 7 mA 85°C
DC31g 3.4 7 mA 125°C
DC30a 3 5 mA 25°C
3.3V
(1.8 MIPS)
FRC (7.37 MHz)
DC30b 3 5 mA 85°C
DC30c 3 5 mA 125°C
DC30e 6 9 mA 25°C
5VDC30f 6 9 mA 85°C
DC30g 6 9 mA 125°C
DC23a 9 14 mA 25°C
3.3V
4 MIPS EC mode, 4X PLL
DC23b 10 15 mA 85°C
DC23c 10 15 mA 125°C
DC23e 16 24 mA 25°C
5VDC23f 16 24 mA 85°C
DC23g 16 24 mA 125°C
DC24a 21 32 mA 25°C
3.3V
10 MIPS EC mode, 4X PLL
DC24b 21 32 mA 85°C
DC24c 21 32 mA 125°C
DC24e 35 53 mA 25°C
5VDC24f 36 53 mA 85°C
DC24g 36 53 mA 125°C
DC27a 39 59 mA 25°C
3.3V
20 MIPS EC mode, 8X PLL
DC27b 39 59 mA 85°C
DC27d 66 99 mA 25°C
5VDC27e 66 99 mA 85°C
DC27f 66 99 mA 125°C
DC29a 95 150 mA 25°C
5V 30 MIPS EC mode, 16X PLL
DC29b 94 150 mA 85°C
Note 1: The supply current is mainly a function of the operating voltage and frequency. Other factors such as I/O
pin loading and switching rate, oscillator type, internal code execution pattern and temperature also have
an impact on the current consumption. The test conditions for all I
DD measurements are as follows: OSC1
driven with external square wave from rail to rail. All I/O pins are configured as inputs and pulled to V
DD.
MCLR
= VDD, WDT, FSCM, LVD and BOR are disabled. CPU, SRAM, Program Memory and Data
Memory are operational. No peripheral modules are operating.