Datasheet

Information subject to change. The Microchip name and logo, the Microchip logo, MPLAB and PIC are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries.
mTouch and PICtail are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. All other trademarks mentioned herein are property of their respective companies. © 2011,
Microchip Technology Incorporated. All Rights Reserved. Printed in the U.S.A. 8/11 DS61171A
*DS61171A*
Visit our web site for additional product information and to locate your local sales office.
Microchip Technology Inc. • 2355 W. Chandler Blvd. • Chandler, AZ 85224-6199
www.microchip.com/motor
Three Plug-In-Modules (PIMs)
These PIMs let you develop designs based on
the PIC24FJ16MC102, dsPIC33FJ16GP102 or
dsPIC33FJ16MC102, using the Explorer 16 development
board (DM240001), the dsPICDEM™ MCLV development
board (DM330021) or the dsPICDEM MCHV development
system (DM330023).
PIC24FJ16MC102 PIM (MA240026)
This PIM comes with a 28-pin
PIC24FJ16MC102 QFN device. Use with
the dsPICDEM MCLV development board
(DM330021) or the dsPICDEM MCHV
development system (DM330023).
dsPIC33FJ16GP102 PIM (MA330029)
This PIM comes with a 28-pin
dsPIC33FJ16GP102 QFN device. Use with the
Explorer 16 development board (DM240001
or DM240002).
dsPIC33FJ16MC102 PIM (MA330026)
This PIM comes with a 28-pin
dsPIC33FJ16MC102 QFN device. Use with
the dsPICDEM MCLV development board
(DM330021) or the dsPICDEM MCHV
development system (DM330023).
Low-cost Development Tools
Migrate your sensing or motor control design to 16-bit
performance with low-cost design tools and comprehensive
online design support from Microchip.
Motor Control Starter Kit (MCSK) with
mTouch™ Sensing (DM330015)
The Motor Control Starter Kit with
mTouch™ sensing is a complete,
integrated development platform based
on the dsPIC33FJ16MC102. It includes
a USB interfaced debugger programmer, a complete drive
circuit featuring Microchip’s TC4428 dual 1.5A gate drivers,
an on-board BLDC Motor, a user configurable switch and an
mTouch slider with LED indicators for speed control. Simply
power the board using the included 9V supply and the pre-
loaded code begins to execute.
See the Motor Control Starter Kit video at:
www.microchip.com/mcsk