Datasheet

6.2.3 Running the demo

1. Attach the Accessory Development Starter Board to the Android device using the connector provided by the Android

device’s manufacturer. Please make sure that the accessory is attached to the Android device before launching the

application.

2. Once the demonstration application has been loaded, go to the Application folder on the Android device. Open the “Basic

Accessory Demo” application.

When the application launches, there are three general sections to the application:

• LED Controls – Pressing any of the 8 buttons on the Android screen sends a command from the Android device to the

accessory, indicating that the LED status has changed and provides the new LED settings. The image on the screen toggles

to show the state of the LEDs.

• Push Button Status – This section indicates the status of the push buttons on the accessory board. When a button is

pressed, the text will change to Pressed.

• Potentiometer – This indicates the percentage of the potentiometer on the accessory board.

Microchip's Accessory Framework for Android(tm) 41