Datasheet

25
Software and Hardware Solutions for the 32-bit Designer
Processor plug-in modules (PIMs) are small circuit boards
which can be used with the various Microchip development
boards to evaluate various MCU families. These plug into
the main processor socket of the development boards so
that different microcontrollers can be quickly and easily
used for prototyping, demonstration or development.
PIC32 General Purpose (MA320001)
This plug-in module enables PIC32
development on the Explorer 16
Development Board (DM24000X) and
supports the MPLAB REAL ICE In-Circuit
Emulator Trace Kit (AC244006). An
80 MHz PIC32MX360F512L with
512 KB of Flash, 32 KB of RAM, four
channels of hardware DMA and instruction trace is installed
on the plug-in module.
PIC32 USB Plug-In Module (MA320002)
This plug-in module enables USB development using a
PIC32 on the Explorer 16 development board. It requires
a USB PICtail Plus (AC164131) for connecting USB
hardware. An 80 MHz PIC32MX460F512L with 512 KB
of Flash, 32 KB of RAM, USB On-The-Go controller, four
channels of hardware DMA and instruction trace is
installed on the plug-in module.
PIC32 USB/CAN Plug-In Module (MA320003)
This plug-in module enables USB and CAN development
with the PIC32MX7 series. An 80 MHz PIC32MX795F512L
with 512 KB of Flash, 128 KB of RAM, USB On-The-Go
controller, 2 × CAN 2.0b modules, eight channels of
dedicated DMA and eight general channels of dedicated
DMA is installed on this plug-in module.
Plug-In Modules
PIC32MX1/MX2 Plug-In-Module (MA320011)
The PIC32MX250F128D plug-in
module is designed to demonstrate the
capabilities of the PIC32MX1XX/2XX
family of devices using the Explorer 16
Development Board. It enables USB
and graphics development with the
PIC32MX2XX series.
PIC32MX450/470 USB Plug-In Module
(MA320002-2)
The capabilities of PIC32MX3/MX4 family of devices
can be demonstrated using the PIC32MX450 PIM and
the Explorer 16 Development Board. It enables USB
development with the PIC32MX4XX series.
PIC32MZ EC Processor Plug-In Module
(MA320012)
The PIC32MZ EC PIM is designed to
demonstrate the capabilities of the
PIC32MZ Embedded Connectivity
family of devices using the Explorer
16 Development Board. It enables
USB, Ethernet and CAN development
with the PIC32MZ series. A 200 MHz
PIC32MZ2048ECH100 MCU with 2 MB Flash, 512 KB
RAM, 40 ch. ADC, high-speed USB, CAN 2.0b and 10/100
Ethernet is installed on the plug-in module.