Datasheet

23
Software and Hardware Solutions for the 32-bit Designer
PIC32 Connectivity Solutions
Wi-Fi G Demo Board (DV102412)
The Wi-Fi G Demo Board is a compact
demonstration platform for customers to
easily evaluate and configure Microchip’s
new MRF24WG0MA Wi-Fi module. The demo
board is a fully-functional standalone web
server powered by two AAA batteries. It
comes with a PIC32 pre-programmed with
the Microchip TCP/IP stack, connected to
an on-board, fully-certified MRF24WG0MA
Wi-Fi module.
Key Features:
■ Complete IEEE 802.11 b/g Wi-Fi solution
■ Supports Infrastructure/Ad hoc networks and
SoftAP networking
■ Web server allows for confi guration of network settings
■ Headers bring out signals for quick prototyping
Machine-to-Machine Development Platform for CDMA
(DM320017)
Microchip’s M2M Development
Platform for CDMA enables the
addition of Machine-to-Machine
communications to your application.
The platform includes CDMA, MiWi
protocol and Ethernet connectivity,
GPS, on-board temperature
sensor and accelerometer, two expansion connections for
customization and support for a microSD card.
Key Features:
■ PIC32MX795F512L @ 80 MHz,
512 KB Flash/128 KB RAM
■ GPS, 10/100 Ethernet and MiWi protocol connectivity
■ Serial communication interface for simple
wired connectivity
■ microSD card support for code, event or image storage
■ On-board 3-axis accelerometer, temperature and
light sensors
■ Two expansion ports for custom sensing or
connectivity development
CAN/LIN PICtail Plus Daughter Card for Explorer 16
(AC164130-2)
This daughter board is used to
facilitate rapid implementation
and evaluation of applications
that use CAN and LIN interfaces.
The PICtail Plus interface is used
for connection to the Explorer 16
Development Board for 16-bit and 32-bit MCUs.
Key Features:
■ Connector to Explorer 16 Development Board and
PIC18 Explorer Board
■ Two CAN communication channels interfacing to
ECAN module
■ Two LIN communication channels interfacing to
UART module
USB PICtail Plus Daughter Card for Explorer 16
(AC164131)
The USB PICtail Plus Daughter Board
is a USB demonstration board for
evaluating Microchip's 16- and 32-bit
USB product lines using the Explorer 16
Development Board.
There are four jumpers on the board
to select the operational mode and
optional features.
Key Features:
■ Example circuits for USB device, embedded host and
On-The-Go (OTG)
■ Both horizontal and vertical PICtail Plus Daughter Board
connection interfaces